射灯用3000k还是4000k

# 此方式下安装kubernetes集群要求Centos版本要在7.5或之上
[root@master ~]# cat /etc/redhat-release
CentOS Linux release 7.5.1804 (Core)

# 主机名成解析 编辑三台服务器的/etc/hosts文件，添加下面内容
192.168.109.100  master
192.168.109.101  node1
192.168.109.102  node2

# 启动chronyd服务
[root@master ~]# systemctl start chronyd
# 设置chronyd服务开机自启
[root@master ~]# systemctl enable chronyd
# chronyd服务启动稍等几秒钟，就可以使用date命令验证时间了
[root@master ~]# date

# 1 关闭firewalld服务
[root@master ~]# systemctl stop firewalld
[root@master ~]# systemctl disable firewalld
# 2 关闭iptables服务
[root@master ~]# systemctl stop iptables
[root@master ~]# systemctl disable iptables

# 编辑 /etc/selinux/config 文件，修改SELINUX的值为disabled
# 注意修改完毕之后需要重启linux服务
SELINUX=disabled

# 编辑分区配置文件/etc/fstab，注释掉swap分区一行
# 注意修改完毕之后需要重启linux服务
 UUID=455cc753-7a60-4c17-a424-7741728c44a1 /boot    xfs     defaults        0 0
 /dev/mapper/centos-home /home                      xfs     defaults        0 0
# /dev/mapper/centos-swap swap                      swap    defaults        0 0

# 修改linux的内核参数，添加网桥过滤和地址转发功能
# 编辑/etc/sysctl.d/kubernetes.conf文件，添加如下配置:
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1

# 重新加载配置
[root@master ~]# sysctl -p

# 加载网桥过滤模块
[root@master ~]# modprobe br_netfilter

# 查看网桥过滤模块是否加载成功
[root@master ~]# lsmod | grep br_netfilter

# 1 安装ipset和ipvsadm
[root@master ~]# yum install ipset ipvsadmin -y

# 2 添加需要加载的模块写入脚本文件
[root@master ~]# cat <<EOF >  /etc/sysconfig/modules/ipvs.modules
#!/bin/bash
modprobe -- ip_vs
modprobe -- ip_vs_rr
modprobe -- ip_vs_wrr
modprobe -- ip_vs_sh
modprobe -- nf_conntrack_ipv4
EOF

# 3 为脚本文件添加执行权限
[root@master ~]# chmod +x /etc/sysconfig/modules/ipvs.modules

# 4 执行脚本文件
[root@master ~]# /bin/bash /etc/sysconfig/modules/ipvs.modules

# 5 查看对应的模块是否加载成功
[root@master ~]# lsmod | grep -e ip_vs -e nf_conntrack_ipv4

[root@master ~]# reboot

# 1 切换镜像源
[root@master ~]# wget https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo -O /etc/yum.repos.d/docker-ce.repo

# 2 查看当前镜像源中支持的docker版本
[root@master ~]# yum list docker-ce --showduplicates

# 3 安装特定版本的docker-ce
# 必须指定--setopt=obsoletes=0，否则yum会自动安装更高版本
[root@master ~]# yum install --setopt=obsoletes=0 docker-ce-18.06.3.ce-3.el7 -y

# 4 添加一个配置文件
# Docker在默认情况下使用的Cgroup Driver为cgroupfs，而kubernetes推荐使用systemd来代替cgroupfs
[root@master ~]# mkdir /etc/docker
[root@master ~]# cat <<EOF >  /etc/docker/daemon.json
{
  "exec-opts": ["native.cgroupdriver=systemd"],
  "registry-mirrors": ["https://kn0t2bca.mirror.aliyuncs.com"]
}
EOF

# 5 启动docker
[root@master ~]# systemctl restart docker
[root@master ~]# systemctl enable docker

# 6 检查docker状态和版本
[root@master ~]# docker version

# 由于kubernetes的镜像源在国外，速度比较慢，这里切换成国内的镜像源
# 编辑/etc/yum.repos.d/kubernetes.repo，添加下面的配置 
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg
       http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg

# 安装kubeadm、kubelet和kubectl
[root@master ~]# yum install --setopt=obsoletes=0 kubeadm-1.17.4-0 kubelet-1.17.4-0 kubectl-1.17.4-0 -y

# 配置kubelet的cgroup
# 编辑/etc/sysconfig/kubelet，添加下面的配置
KUBELET_CGROUP_ARGS="--cgroup-driver=systemd"
KUBE_PROXY_MODE="ipvs"

# 4 设置kubelet开机自启
[root@master ~]# systemctl enable kubelet

# 在安装kubernetes集群之前，必须要提前准备好集群需要的镜像，所需镜像可以通过下面命令查看
[root@master ~]# kubeadm config images list

# 下载镜像
# 此镜像在kubernetes的仓库中,由于网络原因,无法连接，下面提供了一种替代方案
images=(
    kube-apiserver:v1.17.4
    kube-controller-manager:v1.17.4
    kube-scheduler:v1.17.4
    kube-proxy:v1.17.4
    pause:3.1
    etcd:3.4.3-0
    coredns:1.6.5
)

for imageName in ${images[@]} ; do
    docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/$imageName
    docker tag registry.cn-hangzhou.aliyuncs.com/google_containers/$imageName       k8s.gcr.io/$imageName
    docker rmi registry.cn-hangzhou.aliyuncs.com/google_containers/$imageName
done

# 创建集群
[root@master ~]# kubeadm init \
    --kubernetes-version=v1.17.4 \
    --pod-network-cidr=10.244.0.0/16 \
    --service-cidr=10.96.0.0/12 \
    --apiserver-advertise-address=192.168.109.100

# 创建必要文件
[root@master ~]# mkdir -p $HOME/.kube
[root@master ~]# sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
[root@master ~]# sudo chown $(id -u):$(id -g) $HOME/.kube/config

# 将node节点加入集群
[root@master ~]# kubeadm join 192.168.109.100:6443 \ 
    --token 8507uc.o0knircuri8etnw2 \
    --discovery-token-ca-cert-hash \
    sha256:acc37967fb5b0acf39d7598f8a439cc7dc88f439a3f4d0c9cae88e7901b9d3f

# 查看集群状态 此时的集群状态为NotReady，这是因为还没有配置网络插件
[root@master ~]# kubectl get nodes
NAME     STATUS     ROLES    AGE     VERSION
master   NotReady   master   6m43s   v1.17.4
node1    NotReady   <none>   22s     v1.17.4
node2    NotReady   <none>   19s     v1.17.4

# 获取fannel的配置文件
[root@master ~]# wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml

# 修改文件中quay.io仓库为quay-mirror.qiniu.com

# 使用配置文件启动fannel
[root@master ~]# kubectl apply -f kube-flannel.yml

# 稍等片刻，再次查看集群节点的状态
[root@master ~]# kubectl get nodes
NAME     STATUS   ROLES    AGE     VERSION
master   Ready    master   15m     v1.17.4
node1    Ready    <none>   8m53s   v1.17.4
node2    Ready    <none>   8m50s   v1.17.4

# 部署nginx
[root@master ~]# kubectl create deployment nginx --image=nginx:1.14-alpine

# 暴露端口
[root@master ~]# kubectl expose deployment nginx --port=80 --type=NodePort

# 查看服务状态
[root@master ~]# kubectl get pods,service
NAME                         READY   STATUS    RESTARTS   AGE
pod/nginx-86c57db685-fdc2k   1/1     Running   0          18m

NAME                 TYPE        CLUSTER-IP      EXTERNAL-IP   PORT(S)        AGE
service/kubernetes   ClusterIP   10.96.0.1       <none>        443/TCP        82m
service/nginx        NodePort    10.104.121.45   <none>        80:30073/TCP   17m

# 4 最后在电脑上访问下部署的nginx服务

kubectl [command] [type] [name] [flags]

# 查看所有pod
kubectl get pod 

# 查看某个pod
kubectl get pod pod_name

# 查看某个pod,以yaml格式展示结果
kubectl get pod pod_name -o yaml

# 创建一个namespace
[root@master ~]# kubectl create namespace dev
namespace/dev created

# 获取namespace
[root@master ~]# kubectl get ns
NAME              STATUS   AGE
default           Active   21h
dev               Active   21s
kube-node-lease   Active   21h
kube-public       Active   21h
kube-system       Active   21h

# 在此namespace下创建并运行一个nginx的Pod
[root@master ~]# kubectl run pod --image=nginx -n dev
kubectl run --generator=deployment/apps.v1 is DEPRECATED and will be removed in a future version. Use kubectl run --generator=run-pod/v1 or kubectl create instead.
deployment.apps/pod created

# 查看新创建的pod
[root@master ~]# kubectl get pod -n dev
NAME                   READY   STATUS    RESTARTS   AGE
pod-864f9875b9-pcw7x   1/1     Running   0          21s

# 删除指定的pod
[root@master ~]# kubectl delete pod pod-864f9875b9-pcw7x
pod "pod-864f9875b9-pcw7x" deleted

# 删除指定的namespace
[root@master ~]# kubectl delete ns dev
namespace "dev" deleted

apiVersion: v1
kind: Namespace
metadata:
  name: dev

---

apiVersion: v1
kind: Pod
metadata:
  name: nginxpod
  namespace: dev
spec:
  containers:
  - name: nginx-containers
    image: nginx:1.17.1

[root@master ~]# kubectl create -f nginxpod.yaml
namespace/dev created
pod/nginxpod created

[root@master ~]#  kubectl get -f nginxpod.yaml
NAME            STATUS   AGE
namespace/dev   Active   18s

NAME            READY   STATUS    RESTARTS   AGE
pod/nginxpod    1/1     Running   0          17s

[root@master ~]# kubectl delete -f nginxpod.yaml
namespace "dev" deleted
pod "nginxpod" deleted

总结:
    命令式对象配置的方式操作资源，可以简单的认为：命令  +  yaml配置文件（里面是命令需要的各种参数）

# 首先执行一次kubectl apply -f yaml文件，发现创建了资源
[root@master ~]#  kubectl apply -f nginxpod.yaml
namespace/dev created
pod/nginxpod created

# 再次执行一次kubectl apply -f yaml文件，发现说资源没有变动
[root@master ~]#  kubectl apply -f nginxpod.yaml
namespace/dev unchanged
pod/nginxpod unchanged

[root@master ~]# kubectl  get namespace
NAME              STATUS   AGE
default           Active   45h     #  所有未指定Namespace的对象都会被分配在default命名空间
kube-node-lease   Active   45h     #  集群节点之间的心跳维护，v1.13开始引入
kube-public       Active   45h     #  此命名空间下的资源可以被所有人访问（包括未认证用户）
kube-system       Active   45h     #  所有由Kubernetes系统创建的资源都处于这个命名空间

# 1 查看所有的ns  命令：kubectl get ns
[root@master ~]# kubectl get ns
NAME              STATUS   AGE
default           Active   45h
kube-node-lease   Active   45h
kube-public       Active   45h     
kube-system       Active   45h     

# 2 查看指定的ns   命令：kubectl get ns ns名称
[root@master ~]# kubectl get ns default
NAME      STATUS   AGE
default   Active   45h

# 3 指定输出格式  命令：kubectl get ns ns名称  -o 格式参数
# kubernetes支持的格式有很多，比较常见的是wide、json、yaml
[root@master ~]# kubectl get ns default -o yaml
apiVersion: v1
kind: Namespace
metadata:
  creationTimestamp: "2020-04-05T04:44:16Z"
  name: default
  resourceVersion: "151"
  selfLink: /api/v1/namespaces/default
  uid: 7405f73a-e486-43d4-9db6-145f1409f090
spec:
  finalizers:
  - kubernetes
status:
  phase: Active

# 4 查看ns详情  命令：kubectl describe ns ns名称
[root@master ~]# kubectl describe ns default
Name:         default
Labels:       <none>
Annotations:  <none>
Status:       Active  # Active 命名空间正在使用中  Terminating 正在删除命名空间

# ResourceQuota 针对namespace做的资源限制
# LimitRange针对namespace中的每个组件做的资源限制
No resource quota.
No LimitRange resource.

# 创建namespace
[root@master ~]# kubectl create ns dev
namespace/dev created

# 删除namespace
[root@master ~]# kubectl delete ns dev
namespace "dev" deleted

apiVersion: v1
kind: Namespace
metadata:
  name: dev

[root@master ~]# kubectl get pod -n kube-system
NAMESPACE     NAME                             READY   STATUS    RESTARTS   AGE
kube-system   coredns-6955765f44-68g6v         1/1     Running   0          2d1h
kube-system   coredns-6955765f44-cs5r8         1/1     Running   0          2d1h
kube-system   etcd-master                      1/1     Running   0          2d1h
kube-system   kube-apiserver-master            1/1     Running   0          2d1h
kube-system   kube-controller-manager-master   1/1     Running   0          2d1h
kube-system   kube-flannel-ds-amd64-47r25      1/1     Running   0          2d1h
kube-system   kube-flannel-ds-amd64-ls5lh      1/1     Running   0          2d1h
kube-system   kube-proxy-685tk                 1/1     Running   0          2d1h
kube-system   kube-proxy-87spt                 1/1     Running   0          2d1h
kube-system   kube-scheduler-master            1/1     Running   0          2d1h

# 命令格式： kubectl run (pod控制器名称) [参数] 
# --image  指定Pod的镜像
# --port   指定端口
# --namespace  指定namespace
[root@master ~]# kubectl run nginx --image=nginx:1.17.1 --port=80 --namespace dev 
deployment.apps/nginx created

# 查看Pod基本信息
[root@master ~]# kubectl get pods -n dev
NAME                     READY   STATUS    RESTARTS   AGE
nginx-5ff7956ff6-fg2db   1/1     Running   0          43s

# 查看Pod的详细信息
[root@master ~]# kubectl describe pod nginx-5ff7956ff6-fg2db -n dev
Name:         nginx-5ff7956ff6-fg2db
Namespace:    dev
Priority:     0
Node:         node1/192.168.109.101
Start Time:   Wed, 08 Apr 2020 09:29:24 +0800
Labels:       pod-template-hash=5ff7956ff6
              run=nginx
Annotations:  <none>
Status:       Running
IP:           10.244.1.23
IPs:
  IP:           10.244.1.23
Controlled By:  ReplicaSet/nginx-5ff7956ff6
Containers:
  nginx:
    Container ID:   docker://4c62b8c0648d2512380f4ffa5da2c99d16e05634979973449c98e9b829f6253c
    Image:          nginx:1.17.1
    Image ID:       docker-pullable://nginx@sha256:485b610fefec7ff6c463ced9623314a04ed67e3945b9c08d7e53a47f6d108dc7
    Port:           80/TCP
    Host Port:      0/TCP
    State:          Running
      Started:      Wed, 08 Apr 2020 09:30:01 +0800
    Ready:          True
    Restart Count:  0
    Environment:    <none>
    Mounts:
      /var/run/secrets/kubernetes.io/serviceaccount from default-token-hwvvw (ro)
Conditions:
  Type              Status
  Initialized       True
  Ready             True
  ContainersReady   True
  PodScheduled      True
Volumes:
  default-token-hwvvw:
    Type:        Secret (a volume populated by a Secret)
    SecretName:  default-token-hwvvw
    Optional:    false
QoS Class:       BestEffort
Node-Selectors:  <none>
Tolerations:     node.kubernetes.io/not-ready:NoExecute for 300s
                 node.kubernetes.io/unreachable:NoExecute for 300s
Events:
  Type    Reason     Age        From               Message
  ----    ------     ----       ----               -------
  Normal  Scheduled  <unknown>  default-scheduler  Successfully assigned dev/nginx-5ff7956ff6-fg2db to node1
  Normal  Pulling    4m11s      kubelet, node1     Pulling image "nginx:1.17.1"
  Normal  Pulled     3m36s      kubelet, node1     Successfully pulled image "nginx:1.17.1"
  Normal  Created    3m36s      kubelet, node1     Created container nginx
  Normal  Started    3m36s      kubelet, node1     Started container nginx

# 获取podIP
[root@master ~]# kubectl get pods -n dev -o wide
NAME                     READY   STATUS    RESTARTS   AGE    IP             NODE    ... 
nginx-5ff7956ff6-fg2db   1/1     Running   0          190s   10.244.1.23   node1   ...

#访问POD
[root@master ~]# curl http://10.244.1.23:80
<!DOCTYPE html>
<html>
<head>
    <title>Welcome to nginx!</title>
</head>
<body>
    <p><em>Thank you for using nginx.</em></p>
</body>
</html>

# 删除指定Pod
[root@master ~]# kubectl delete pod nginx-5ff7956ff6-fg2db -n dev
pod "nginx-5ff7956ff6-fg2db" deleted

# 此时，显示删除Pod成功，但是再查询，发现又新产生了一个 
[root@master ~]# kubectl get pods -n dev
NAME                     READY   STATUS    RESTARTS   AGE
nginx-5ff7956ff6-jj4ng   1/1     Running   0          21s

# 这是因为当前Pod是由Pod控制器创建的，控制器会监控Pod状况，一旦发现Pod死亡，会立即重建
# 此时要想删除Pod，必须删除Pod控制器

# 先来查询一下当前namespace下的Pod控制器
[root@master ~]# kubectl get deploy -n  dev
NAME    READY   UP-TO-DATE   AVAILABLE   AGE
nginx   1/1     1            1           9m7s

# 接下来，删除此PodPod控制器
[root@master ~]# kubectl delete deploy nginx -n dev
deployment.apps "nginx" deleted

# 稍等片刻，再查询Pod，发现Pod被删除了
[root@master ~]# kubectl get pods -n dev
No resources found in dev namespace.

apiVersion: v1
kind: Pod
metadata:
  name: nginx
  namespace: dev
spec:
  containers:
  - image: nginx:1.17.1
    name: pod
    ports:
    - name: nginx-port
      containerPort: 80
      protocol: TCP

# 为pod资源打标签
[root@master ~]# kubectl label pod nginx-pod version=1.0 -n dev
pod/nginx-pod labeled

# 为pod资源更新标签
[root@master ~]# kubectl label pod nginx-pod version=2.0 -n dev --overwrite
pod/nginx-pod labeled

# 查看标签
[root@master ~]# kubectl get pod nginx-pod  -n dev --show-labels
NAME        READY   STATUS    RESTARTS   AGE   LABELS
nginx-pod   1/1     Running   0          10m   version=2.0

# 筛选标签
[root@master ~]# kubectl get pod -n dev -l version=2.0  --show-labels
NAME        READY   STATUS    RESTARTS   AGE   LABELS
nginx-pod   1/1     Running   0          17m   version=2.0
[root@master ~]# kubectl get pod -n dev -l version!=2.0 --show-labels
No resources found in dev namespace.

#删除标签
[root@master ~]# kubectl label pod nginx-pod version- -n dev
pod/nginx-pod labeled

apiVersion: v1
kind: Pod
metadata:
  name: nginx
  namespace: dev
  labels:
    version: "3.0" 
    env: "test"
spec:
  containers:
  - image: nginx:1.17.1
    name: pod
    ports:
    - name: nginx-port
      containerPort: 80
      protocol: TCP

# 命令格式: kubectl run deployment名称  [参数] 
# --image  指定pod的镜像
# --port   指定端口
# --replicas  指定创建pod数量
# --namespace  指定namespace
[root@master ~]# kubectl run nginx --image=nginx:1.17.1 --port=80 --replicas=3 -n dev
deployment.apps/nginx created

# 查看创建的Pod
[root@master ~]# kubectl get pods -n dev
NAME                     READY   STATUS    RESTARTS   AGE
nginx-5ff7956ff6-6k8cb   1/1     Running   0          19s
nginx-5ff7956ff6-jxfjt   1/1     Running   0          19s
nginx-5ff7956ff6-v6jqw   1/1     Running   0          19s

# 查看deployment的信息
[root@master ~]# kubectl get deploy -n dev
NAME    READY   UP-TO-DATE   AVAILABLE   AGE
nginx   3/3     3            3           2m42s

# UP-TO-DATE：成功升级的副本数量
# AVAILABLE：可用副本的数量
[root@master ~]# kubectl get deploy -n dev -o wide
NAME    READY UP-TO-DATE  AVAILABLE   AGE     CONTAINERS   IMAGES              SELECTOR
nginx   3/3     3         3           2m51s   nginx        nginx:1.17.1        run=nginx

# 查看deployment的详细信息
[root@master ~]# kubectl describe deploy nginx -n dev
Name:                   nginx
Namespace:              dev
CreationTimestamp:      Wed, 08 Apr 2020 11:14:14 +0800
Labels:                 run=nginx
Annotations:            deployment.kubernetes.io/revision: 1
Selector:               run=nginx
Replicas:               3 desired | 3 updated | 3 total | 3 available | 0 unavailable
StrategyType:           RollingUpdate
MinReadySeconds:        0
RollingUpdateStrategy:  25% max unavailable, 25% max surge
Pod Template:
  Labels:  run=nginx
  Containers:
   nginx:
    Image:        nginx:1.17.1
    Port:         80/TCP
    Host Port:    0/TCP
    Environment:  <none>
    Mounts:       <none>
  Volumes:        <none>
Conditions:
  Type           Status  Reason
  ----           ------  ------
  Available      True    MinimumReplicasAvailable
  Progressing    True    NewReplicaSetAvailable
OldReplicaSets:  <none>
NewReplicaSet:   nginx-5ff7956ff6 (3/3 replicas created)
Events:
  Type    Reason             Age    From                   Message
  ----    ------             ----   ----                   -------
  Normal  ScalingReplicaSet  5m43s  deployment-controller  Scaled up replicaset nginx-5ff7956ff6 to 3

# 删除 
[root@master ~]# kubectl delete deploy nginx -n dev
deployment.apps "nginx" deleted

apiVersion: apps/v1
kind: Deployment
metadata:
  name: nginx
  namespace: dev
spec:
  replicas: 3
  selector:
    matchLabels:
      run: nginx
  template:
    metadata:
      labels:
        run: nginx
    spec:
      containers:
      - image: nginx:1.17.1
        name: nginx
        ports:
        - containerPort: 80
          protocol: TCP

# 暴露Service
[root@master ~]# kubectl expose deploy nginx --name=svc-nginx1 --type=ClusterIP --port=80 --target-port=80 -n dev
service/svc-nginx1 exposed

# 查看service
[root@master ~]# kubectl get svc svc-nginx -n dev -o wide
NAME         TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)   AGE     SELECTOR
svc-nginx1   ClusterIP   10.109.179.231   <none>        80/TCP    3m51s   run=nginx

# 这里产生了一个CLUSTER-IP，这就是service的IP，在Service的生命周期中，这个地址是不会变动的
# 可以通过这个IP访问当前service对应的POD
[root@master ~]# curl 10.109.179.231:80
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>
</head>
<body>
<h1>Welcome to nginx!</h1>
.......
</body>
</html>

# 上面创建的Service的type类型为ClusterIP，这个ip地址只用集群内部可访问
# 如果需要创建外部也可以访问的Service，需要修改type为NodePort
[root@master ~]# kubectl expose deploy nginx --name=svc-nginx2 --type=NodePort --port=80 --target-port=80 -n dev
service/svc-nginx2 exposed

# 此时查看，会发现出现了NodePort类型的Service，而且有一对Port（80:31928/TC）
[root@master ~]# kubectl get svc  svc-nginx-1  -n dev -o wide
NAME          TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)        AGE    SELECTOR
svc-nginx2    NodePort    10.100.94.0      <none>        80:31928/TCP   9s     run=nginx

# 接下来就可以通过集群外的主机访问 节点IP:31928访问服务了
# 例如在的电脑主机上通过浏览器访问下面的地址
http://192.168.109.100:31928/

[root@master ~]# kubectl delete svc svc-nginx-1 -n dev                                   service "svc-nginx-1" deleted

apiVersion: v1
kind: Service
metadata:
  name: svc-nginx
  namespace: dev
spec:
  clusterIP: 10.109.179.231
  ports:
  - port: 80
    protocol: TCP
    targetPort: 80
  selector:
    run: nginx
  type: ClusterIP